| This is the radio controlled, glow powered, Almost Ready-to-Fly, Great Planes Matt Chapman Cap 580 scale Airplane. Ideal for 3D aerobatics, and everyday sport flying. For Advanced Modeler/Fliers. FEATURES: Construction: Balsa and plywood Wings: Two wing halves joined together to become a one-piece wing Covering: Top Flite MonoKote color scheme is Yellow with splashes of Blue, Orange, Green Red and Purple, Red and White target graphic on underside Radio Compartment: Plywood reinforced, accessible under canopy Cowling: Pre-painted, fiberglass construction Canopy: Single clear, canopy is removable for easy access to radio equipment Pilot: Pre-painted pilot bust (L 1.65" W 3.95" H 3.4") Wheel Pants: Pre-painted, fiberglass construction Fuel Tank: 9.13oz (270cc) (L 4.60" W 2.23" H 2.4") Engine Mount: Great Planes 60-120 nylon adjustable (GPMG1091) Landing Gear: pre-painted aluminum main gear and steerable tailwheel Wheels: 2.5" (63mm) diameter foam main wheels and 1" foam tailwheel Spinner: 2.5" (63mm) diameter plastic construction Aileron Control: Dual servo (one servo in each wing half) Rudder Control: Single servo, pushrod controlled Building Time: Ready to fly in 15-20 hours, approximately Hardware: Included Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at date of purchase. INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent main landing gear, tailwheel wire, 2.5" main wheels, 1" tailwheel, nylon adjustable engine mount, 9.13oz (270cc) fuel tank, 2.5" (63mm) plastic spinner, fiberglass cowling and wheel pants, canopy, pilot bust, hardware package and instruction manual. REQUIRES: Engine: .46-.61 cu in (7.5-10cc) 2-stroke OR .52-.70 cu in (8.5-11.5cc) 4-stroke Muffler: Pitts muffler for 2-stroke engine and stock muffler for a four-stroke engine (engine is side mounted) Radio: 4-channel Servos: 4 standard size with minimum 54 oz-in torque and one standard size with minimum 30 oz-in for throttle control Servo Extension 6": 1 required - HCAM2701 Y-Harness: One for ailerons - HCAM2500 Servo Reverser: If modeler does not want to wire two pushrods together as described in step 8 on page 16, there is room to add another servo for the elevator. If a computer radio is not used, a servo reverser (FUTM4150), for the additional elevator servo is required. Misc. Items: 1/4" foam rubber padding, fuel tubing, glow fuel, fuel filter, propeller, building and field equipment. SPECS: Wingspan: 55.5" (1410mm) Wing Area: 562.5 sq in (36.3 sq dm) Weight: 6.75-7.5lb (3.1-3.4kg) Wing Loading: 28-30 oz/sq ft (85-92 g/sq dm) Length: 52.5" (1335mm) Airfoil: fully symmetrical, low-wing Center of Gravity: 3-1/2" (89mm) Back from the wing's leading edge Wing Incidence: 0° Stab Incidence: 0° Engine Thrust: 2° right, 3° up Control Throws- High Rate Low Rate Elevator: Up 1/2" (13mm) 3/8" (9.5mm) Elevator: Down 3/4" (19mm) 5/8" (16mm) Rudder: Right to Left 3" (76mm) 1-3/4" (44mm) Ailerons: Up & Down 5/8" (16mm) 1/2" (13mm) |
This is the radio controlled, glow or electric powered, almost-ready-to-fly,
Great Planes Revolver Sport Aerobatic Airplane.
For Average Sport Pilots.
FEATURES: Construction: Balsa and ply
Wings: Two piece, foam core balsa sheeted, aluminum wing tube
Cowl: Painted fiberglass
Covering: Factory applied Top Flite MonoKote
Radio Compartment: Plywood reinforced
Landing Gear: Pre-formed composite
Wheels: Two main 2.71" (69mm) diameter, one 1.18" (30mm) tail wheel
Wheel Pants: Painted and constructed of fiberglass
Spinner: 3.25" (83mm) diameter aluminum
Canopy: Vacuum formed, tinted
Aileron Control: Dual servo
Tail Group: Airfoil shaped tail surfaces for better tracking
Fuel Tank: Approximately 16oz (480cc)
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent main landing gear, main and tail wheels, wood servo trays,
two wheel pants, fiberglass cowl, hardware package,engine mount,
pilot, fuel tank, photo-illustrated instructions and decal sheet
REQUIRES: Engine: .46 -.55 cu in (7 - 9cc) two stroke OR
.70 cu in (11.5cc) four stroke OR brushless motor (see below)
Muffler: Pitts type (BISG4046)
Motor: Brushless type Great Planes Rimfire 42-60-800 (GPMG4725)
Motor Mount: Medium size, (GPMG1255)
Electronic Speed Control: 80A (GPMM1860)
Radio: 4-channel minimum
Servos: 4 standard size for electric operation, one extra servo
required for throttle if using glow engine (FUTM0075)
6" (152mm) Servo Extension: (HCAM2701)
Y-Harness: One for aileron servos (HCAM2751)
Battery: Two 3200mAh 11.1V Balanced LiPo (GPMP0623)
LiPo Cell Balancer: (GPMM3160)
Adapter: Deans U Adapter 2 to 1 (GPMM3143)
Battery Charger: LiPo compatible (GPMM3015)
Propeller: Glow, size depending on engine selected
Electric, 11.5x5 (APCQ1055)
Misc. Items: Building and field equipment
SPECS: Wingspan: 59" (1500mm)
Wing Area: 563 sq in (36 sq dm)
Flying Weight: 6 - 7 lb (2720 - 3180g)
Wing Loading: 25 - 29 oz/sq ft (76 - 88 g/sq dm)
Length: 48" (1220mm)
Airfoil: Semi symmetrical
Center of Gravity: 4-5/16" (110mm) Back from the leading edge of the
wing at the fuselage
Control Throws: Low Rate High Rate
Elevator: Up & Down, 5/16" (8mm) 1/2" (13mm)
Rudder: Right to Left, 1-3/8" (35mm) 2-1/4" (57mm)
Ailerons: Up & Down, 1/4" (6mm) 3/8" (10mm)
Great Planes Revolver Sport Aerobatic Airplane.
For Average Sport Pilots.
FEATURES: Construction: Balsa and ply
Wings: Two piece, foam core balsa sheeted, aluminum wing tube
Cowl: Painted fiberglass
Covering: Factory applied Top Flite MonoKote
Radio Compartment: Plywood reinforced
Landing Gear: Pre-formed composite
Wheels: Two main 2.71" (69mm) diameter, one 1.18" (30mm) tail wheel
Wheel Pants: Painted and constructed of fiberglass
Spinner: 3.25" (83mm) diameter aluminum
Canopy: Vacuum formed, tinted
Aileron Control: Dual servo
Tail Group: Airfoil shaped tail surfaces for better tracking
Fuel Tank: Approximately 16oz (480cc)
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent main landing gear, main and tail wheels, wood servo trays,
two wheel pants, fiberglass cowl, hardware package,engine mount,
pilot, fuel tank, photo-illustrated instructions and decal sheet
REQUIRES: Engine: .46 -.55 cu in (7 - 9cc) two stroke OR
.70 cu in (11.5cc) four stroke OR brushless motor (see below)
Muffler: Pitts type (BISG4046)
Motor: Brushless type Great Planes Rimfire 42-60-800 (GPMG4725)
Motor Mount: Medium size, (GPMG1255)
Electronic Speed Control: 80A (GPMM1860)
Radio: 4-channel minimum
Servos: 4 standard size for electric operation, one extra servo
required for throttle if using glow engine (FUTM0075)
6" (152mm) Servo Extension: (HCAM2701)
Y-Harness: One for aileron servos (HCAM2751)
Battery: Two 3200mAh 11.1V Balanced LiPo (GPMP0623)
LiPo Cell Balancer: (GPMM3160)
Adapter: Deans U Adapter 2 to 1 (GPMM3143)
Battery Charger: LiPo compatible (GPMM3015)
Propeller: Glow, size depending on engine selected
Electric, 11.5x5 (APCQ1055)
Misc. Items: Building and field equipment
SPECS: Wingspan: 59" (1500mm)
Wing Area: 563 sq in (36 sq dm)
Flying Weight: 6 - 7 lb (2720 - 3180g)
Wing Loading: 25 - 29 oz/sq ft (76 - 88 g/sq dm)
Length: 48" (1220mm)
Airfoil: Semi symmetrical
Center of Gravity: 4-5/16" (110mm) Back from the leading edge of the
wing at the fuselage
Control Throws: Low Rate High Rate
Elevator: Up & Down, 5/16" (8mm) 1/2" (13mm)
Rudder: Right to Left, 1-3/8" (35mm) 2-1/4" (57mm)
Ailerons: Up & Down, 1/4" (6mm) 3/8" (10mm)
| Twist 3D 60 ARF Key Features Proven Sport 3D design Electric Power option Bolt-together design with control surfaces prehinged Top-quality balsa and ply construction Attractive Hangar 9 Ultracote trim scheme Overview 3D doesn't get any more fun, or convenient, than this. The Twist 3D 60 ARF from Hangar 9 is a versatile aerobatic aircraft that lets you fly any way you want, whether you’re into glow fuel or electric. It includes an electric power option with all necessary hardware included. No conversion is necessary, so you can go electric right from the start. From knife-edge to harriers, flat spins to hovers, the Twist 3D 60 has the 3D moxie you demand and, with its bold electric power option and bolt-together assembly, the convenience and reliability you trust from Hangar 9. Specs Wing Span: 54.75 in (1391mm) Overall Length: 56.6 in (1438mm) Wing Area: 992 sq in (64 sq dm) Flying Weight: 6.5-7.5 lb (2.9-3.4 kg) Engine Size: (glow version) .60-75 2-stroke; .91-1.00 4-stroke Motor Size: (electric version) Power 60 outrunner (EFLM4060A) Radio: 4 channels w/5 servos (4 servos for electric version) Trim Scheme Colors: Black (HANU874), Grey (HANU882), White (HANU870), Flame Red (HANU883) Speed Control : Castle Creations Phoenix-80 brushless ESC (CSEPHX80) Recommended Battery: (electric version) 2 Thunder Power 4200mAh 3S2P Li-Po battery packs (THP42003S2PPL) |
Extra 260 90 ARF
Key Features
Lightweight laser-cut balsa and plywood construction
.90-size airframe, popular Extra platform
Covered in genuine Hangar 9 UltraCote
Quality fiberglass cowl
Excellent combination of aerobatic performance and value
Overview
Able to fly smoothly with a variety of engines, including lightweight 20cc gassers and Saito's FA-125
four-strokes, Seagull's Extra 260 90 ARF is capable of superior precision and extreme 3D action. It’s
also totally up-to-date with the latest trends in styling and performance. The Extra 260 ARF utilizes top-
quality materials such as laser-cut balsa and plywood and the latest construction techniques to create
this mid-size performer that's a must-have for the value-minded modeler. The Extra 260 even comes
dressed for success with genuine Hangar 9 UltraCote covering.
For superior aerobatic precision and performance at a nice price, try the Extra 260 90 ARF from
Seagull. With its exacting control and handling, hovers, torque rolls and other maneuvers feel smooth
to the touch. Snap rolls, knife-edge, inside and outside loops...this plane can do it all. Its 3D
performance is almost on par with that of higher-priced ARF’s, making this Extra 260 a tremendous
value.
Specs
Wing Span: 63 in
Overall Length: 59.4 in
Wing Area: 728 sq in
Flying Weight: 8.4-9.9 lb
Engine Size: .91-1.25 2 or 4 stroke
Radio: 6-channel with 6 servos
Key Features
Lightweight laser-cut balsa and plywood construction
.90-size airframe, popular Extra platform
Covered in genuine Hangar 9 UltraCote
Quality fiberglass cowl
Excellent combination of aerobatic performance and value
Overview
Able to fly smoothly with a variety of engines, including lightweight 20cc gassers and Saito's FA-125
four-strokes, Seagull's Extra 260 90 ARF is capable of superior precision and extreme 3D action. It’s
also totally up-to-date with the latest trends in styling and performance. The Extra 260 ARF utilizes top-
quality materials such as laser-cut balsa and plywood and the latest construction techniques to create
this mid-size performer that's a must-have for the value-minded modeler. The Extra 260 even comes
dressed for success with genuine Hangar 9 UltraCote covering.
For superior aerobatic precision and performance at a nice price, try the Extra 260 90 ARF from
Seagull. With its exacting control and handling, hovers, torque rolls and other maneuvers feel smooth
to the touch. Snap rolls, knife-edge, inside and outside loops...this plane can do it all. Its 3D
performance is almost on par with that of higher-priced ARF’s, making this Extra 260 a tremendous
value.
Specs
Wing Span: 63 in
Overall Length: 59.4 in
Wing Area: 728 sq in
Flying Weight: 8.4-9.9 lb
Engine Size: .91-1.25 2 or 4 stroke
Radio: 6-channel with 6 servos
 |  |  |  |  |  |  |  |
| These are just a sample of what is available. Don't see what you are looking for? Give us a call. You won't be disappointed! |
$199.99
$169.99
$149.99
$199.99
